Concentrates for magnetic particle testing (black and white)
In non-destructive material testing (NDT), black and white magnetic particle testing is one of the most proven methods for visualizing surface cracks. Black magnetic powder is applied to a surface previously coated with contrast spray. Concentrates for black and white magnetic particle inspection are particularly economical and flexible to use and can be individually diluted by the user - depending on the inspection process and system technology.
Complementary products
PFINDER 280
WHITE CONTRAST PAINT
FOR MAGNETIC PARTICLE TESTING
PFINDER 890
PRECLEANER AND REMOVER
GOSSEN MAVOMASTER
DUAL UV AND WHITE LIGHT METER
What are concentrates for black and white magnetic particle testing?
Concentrates are highly concentrated test agents that contain black magnetic powder, wetting agents and other functional substances. Before use, they are diluted in a suitable carrier medium (e.g. test oil or water) and brought into suspension. This form of preparation offers maximum control over the magnetic particle concentration and therefore the test sensitivity.
Especially in industrial environments with different testing tasks and automated systems, concentrates offer an optimal solution for economical and precise testing processes.
Advantages of concentrates for the black-and-white process
Concentrates for black and white magnetic particle inspection offer numerous advantages:
- Individual dosing according to process requirements
- Space and cost saving during transportation and storage
- High particle purity and stable properties
- Flexible use in manual and automated systems
- Long-term stability of the suspension with correct preparation
PFINDER: Specialist in concentrates for magnetic particle testing
PFINDER offers specially developed concentrates for black and white magnetic particle testing, which are characterized by high efficiency, excellent particle properties and stable suspension properties. PFINDER is one of the leading suppliers in the field of non-destructive material testing and offers a wide range of concentrates for magnetic particle testing. Our products also set standards in the field of concentrates for daylight testing in terms of sensitivity and display contrast.
Our concentrates enable fast and reliable detection of the finest surface cracks without UV radiation. They are suitable for both manual and automated inspection systems - from single part inspection to series production.
We are here for you!
We support our customers. Together, we develop solutions for an optimal testing process with the right test equipment: technical advice, test series, process optimization and on-site training - the PFINDER experts are always atyour sideas experienced contacts.
Typical areas of application for PFINDER concentrates
PFINDER concentrates are used in a wide range of industries:
- Automotive & supplier industry: Series testing of safety-relevant components
- Mechanical & plant engineering: Weld seam testing in the factory or on the construction site
- Aviation & power generation: Visible testing without UV equipment
- Maintenance & repair: Customizable test agent quantities as required
GREEN NDT: More sustainability in NDT processes
PFINDER pursues with GREEN NDT PFINDER pursues a clear strategy for the continuous improvement of occupational safety in testing processes and the environmental properties of test equipment - while maintaining a high level of cost-effectiveness.
Our concentrates are formulated in such a way that they fulfill all normative requirements and at the same time are as safe and user-friendly as possible.
Concentrates for magnetic particle testing - quality you can rely on
Our concentrates are usually diluted with water at a ratio of 1:20 to 1:100 - depending on the component, the test task, the magnetization situation and the desired corrosion protection. The modular structure of the formulations makes them easy to use in existing or new MT testing processes.
Concentrates for magnetic particle testing from PFINDER combine the highest quality standards with economic efficiency. As frequently used test equipment in the field of non-destructive material testing (NDT), they are ideal for companies that place the highest demands on safety and reproducibility.
With concentrates from PFINDER, you can rely on tested quality and many years of experience in magnetic particle testing.
